Publications
Partners
Keen to rejuvenate your space? Start by revamping your floors with Woodoc Water-Borne FLOOR Matt White.
You will need
- wooden floor
- sanding machine and sandpaper in various grits (from rough to fine); we got the professionals in for this part
- Woodoc Water-Borne FLOOR Matt White
- good-quality wide brush
- 150-grit sandpaper
1 We got professionals in to sand the floor before we applied the sealer. They started with rough sandpaper and then moved on to medium followed by fine sandpaper.
2 Make sure the floor is clean and dust-free before you apply the sealer.
3 Apply the Woodoc Water-Borne FLOOR Matt White to the bare floorboards with a wide brush; apply with the grain. Do about 3–4 planks at a time.
4 Let it dry completely; drying times will vary, depending on weather conditions.
5 Lightly sand the sealer with the 150-grit sandpaper, by hand. Remove all the dust.
6 Apply a second coat in the same way you did the first coat. Let it dry and sand lightly again. Remove dust.
7 Apply a third and final coat. Do not sand after the third coat.
