You will need

SHOPPING LIST

  • bunny template
  • laminated pine shelf (600 x 400mm)
  • 3 wooden doorknobs
  • screws
  • pine batten (22 x 22 x 410mm)
  • Woodoc Water-Borne FLOOR  Clear Matt/Gloss
  • Woodoc Colours in Opal, Seaweed, Inky Blue and Full Moon

TOOLS

  • pencil
  • g-clamps
  • jigsaw
  • 4 containers for mixing
  • mixing spatulas
  • paintbrushes
  • drill with 3mm wood drill bit
  • screwdriver

 

Download (HERE) and print the bunny template,then cut it out.

Trace three bunnies on the pine shelf, secure it to your work surface with the g-clamps, and carefully cut the bunnies out with the jigsaw.

Mix the Woodoc Colours in Opal, Seaweed and Inky Blue with about 75ml of Woodoc Water- Borne FLOOReach.

Paint each of the bunnies’ bottom circles about a third of the way up with the three different colours. Let it dry and paint a second coat.

In a separate container, mix about 100ml of Woodoc Water-BorneFLOORwith Woodoc Colours in Full Moon.

Dip the doorknobs in the Woodoc Colours Full Moon mixture and set aside to dry. Dip the bunnies’ ear tips in this mixture too, and hang upside down to dry.

Once everything is dry, drill a pilot hole where the ‘tails’ should go and attach them with screws.

Position all the bunnies next to each other, upside down, with their sides touching. Place the batten across them and screw in place. All done! 

 

Tip You can either attach the hooks to the wall with double-sided tape or attach picture hangers to the batten and hang them from that.