Publications
Partners
Use Woodoc 10 Polywax Sealer (Clear or Velvet) to give your wooden vanity a water-resistant, velvety finish.
You will need
* Woodoc 10 Interior Polywax Sealer (Clear or Velvet)
* sandpaper (80- and 100-grit)
* masking tape
* paintbrush
* steel wool
* cloth
* mineral turpentine
STEPS
1. Use the sandpaper to sand the surface smooth.
2. Make sure the surface is dry and dust-free. Mask around the edges.
3. Apply the first coat of Woodoc 10 until the surface remains evenly glossy for at least 10 minutes after application. Apply more product to dull/dry areas. Allow it to dry completely.
4. Sand lightly with steel wool. Remove the dust with a clean, dry cloth then wipe with mineral turpentine. Apply two more coats in the same way. Do not sand after the third coat has dried.
